The European plug-in connector (rear plug) is a cable splitter, which is a type of cable accessory.
Appearance
The overall structure is "T". The larger port on the top is used to connect the main cable, and the lateral port perpendicular to it is used to lead out the branch cable. The bottom port is usually equipped with specific sealing or connection components to ensure good fit and sealing with the cable system.
It is a fully insulated, fully sealed detachable cable connector suitable for medium and high voltage power systems, commonly used in ring network switch cabinets, cable branch boxes and box-type substations.
• Classification: It is divided into ordinary type, waterproof type, dustproof type, mini type, etc. to meet different environmental requirements;
• According to the installation method, it can be divided into front plug-in type (direct docking equipment) and rear plug-in type (suitable for cable branch boxes).
| Voltage level | Covering 10KV, 12KV to 24KV system voltage35. |
| Rated current | Standard is 630A, and some support short-term overload to 900A (for 8 hours). |
| Applicable cables | Conductor cross-section 25-400mm² (copper or aluminum), compatible with insulation materials such as cross-linked polyethylene (XLPE). |
Power equipment connection: used for the inlet and outlet terminal connections of transformers, ring network cabinets, and cable branch boxes, supporting vertical, horizontal, and any-angle installation.
Industrial field: Protection level up to IP44/IP66/IP67, suitable for industrial control equipment and outdoor devices
